Describe
FAQ

BS EN10219 S235JRH square tube

BS EN10219 S235JRH square tube scope
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.

S235JRH chemical composition

C ≤	N ≤	Mn ≤	P ≤	S ≤
0.17	0.009	1.40	0.040	0.040

EN10219 S235JRH steel pipe mechanical properties

Steel grade		Minimum yield strength ReH mpa		Tensile strength RM mpa		Minimum elongation Ad %	Minimum impact energy KVeJ
		Specified thickness mm		Specified thickness mm		Specified thickness	At test temperature of
S235JRH	1.0039	<=16	>16<=40	<3	>=3<=40	<=40	-200C	00C	200C
		235	225	360-510	360-510	24b	-	-	27

BS EN10219 S235JRH square tube delivery condition
The hollow sections shall be delivered cold formed without subsequent heat treatment except that the weld seam
may be in the as welded or heat treated condition.
NOTE For SAW hollow sections above 508 mm outside diameter it may be necessary to perform a warm shaping
operation, which does not affect the mechanical properties, in order to meet the out-of-roundness tolerance requirements.

Quotations:

FOB/CFR/CIF
Products Inspection:

Issued Original Mill test certificate
Products Service:

Shot blasting and Painting, Cutting, welding and so on
Shipside:

Qingdao, Shanghai, Tianjin, ect.